Archive for May, 2019

We went through the pain a few years back of getting this working in slapd.conf on DSM5 but needed to configure recently on DSM6 (which now uses cn=config). It took a while to crack but is really simple now we know how!

Install Directory Server from the Package Center on every node

Launch Directory Server and configure the basic settings on every node;

(I would suggest checking the “Disallow anonymous binds” option under “Connection Settings”);

From the control panel, select the Domain/LDAP option and check “Enable LDAP Client” on the LDAP tab. Enter localhost as the server address, SSL for encryption and the BaseDN from the Directory Server settings screen then click Apply.

Now use JXplorer (or your LDAP tool of choice) to connect to the cn=config database (again, you will need to repeat this step for every node);

You should see something like;

Switch to Table Editor, right click olcSyncrepl and chose “Add another value”. Then you need to paste;

{1}rid=002 provider=ldap:// bindmethod=simple timeout=0 network-timeout=0 binddn="uid=root,cn=users,dc=tick,dc=home" credentials="password123" keepalive=0:0:0 starttls=no filter="(objectclass=*)" searchbase="dc=tick,dc=home" scope=sub schemachecking=off type=refreshAndPersist retry="60 +"

You will need to replace;

  • the provider (depending on whether you are using a VPN, have a static IP etc)
  • the binddn (you will find this on the main screen of the Directory Server app as per my earlier screenshot)
  • the credentials (this is the password you configured when configuring the Directory Server earlier)
  • the searchbase (you will find this on the main screen of the Directory Server app as per my earlier screenshot)

Then locate olcMirrorMode and click into the value column and select True;

If you have more than 2 nodes in your n-way multi-master replication “cluster” you will need to add an additional olcSyncrepl entry for each node (be sure to increment the {1} and 002.

That’s it (I rebooted for good measure). Now try creating a user on each node and check it appears on your other nodes.

If you experience any issues your best bet is probably checking /var/log/messages

Good luck!

Whilst documentation/guides/info around GitLab CI on Linux, using Docker and working with languages such as Ruby seems forthcoming, I found little on .NET and Windows. So after spending a lot of time getting it working I wanted to share.

I have deployed a new, clean GitLab CE virtual machine and Windows 10 Professional virtual machine for the purposes of this post. You will need to either load a valid SSL certificate or use HTTP (there is plenty of information online around configuring either way).

The first thing is to download the 64bit Windows GitLab Runner 
from I chose to create a folder C:\GitLab-Runner to try and keep everything in one place. Then follow the instructions to register and install as a service (when prompted to enter the executor, enter shell).

Now let’s take a look at my .gitlab-ci.yml template;

  - build
  - test

  CI_DEBUG_TRACE: "false"

 stage: build
  - 'call c:\gitlab-runner\build_script.bat'
   - Tests/bin/

 stage: test
  - 'call c:\gitlab-runner\test_script.bat' 
 coverage: '/\(\d+\.\d+\)/'
  - build
   junit: testresult.xml

There are a few points to note;

  • The order of the stages- it seemed odd to me at first, but the build needs to happen before the test
  • CI_DEBUG_TRACE could be omitted, but if anything doesn’t work it provides a nice way to troubleshoot
  • For both the build and test we call an external batch file- this makes it really simple/easy to change our CI by modifying a central script rather than going into every project and modifying the .yml (if we do have any special cases we can modify the .yml directly)
  • The build artifacts (we need the test binaries which include all of the compiled references)
  • The test artifacts

Now let’s look at our build_script.bat;

C:\Windows\Microsoft.NET\Framework\v4.0.30319\nuget restore
"C:\Program Files (x86)\Microsoft Visual Studio\2017\BuildTools\MSBuild\15.0\bin\msbuild" /t:Restore,Clean,ReBuild /p:Configuration=Debug;Platform="Any CPU"
"C:\Program Files (x86)\Microsoft Visual Studio\2017\BuildTools\MSBuild\15.0\bin\msbuild" /t:ReBuild /p:Configuration=Release;Platform="Any CPU"
ping -n 1 -w 10000 2>nul || type nul>nul

To work, our .sln must sit in the root of the repository. There are essentially 3 steps;

  • Restore all nuget packages
  • Attempt to build using the debug config
  • Attempt to build using the release config
  • Wait for 10 seconds (without this some files become locked and cause the test stage to fail)

We also have a private NuGet server which needs adding for the user the GitLab runner service is executing as (SYSTEM here), so we enter this line for the first execution then it can be removed straight away;

C:\Windows\Microsoft.NET\Framework\v4.0.30319\nuget sources add -Name "Tickett Enterprises Limited" -Source -username "svc-blah" -password "password123"

And our test_script.bat;

c:\GitLab-Runner\opencover\OpenCover.Console.exe -returntargetcode:1000 -register -target:"C:\Program Files (x86)\\nunit-console\nunit3-console.exe" -targetargs:"Tests\Tests.csproj --result=testresult.xml;transform=C:\gitlab-runner\nunit3-junit.xslt"

To work, our test project must be called Tests.csproj and reside in a folder named Tests. The entire script is combined into a single step which;

  • Uses OpenCover to
  • Execute our tests using nunit3
  • Ensures any error returned by nunit3 is in turn returned by OpenCover
  • Transforms nunit3’s output into a format which GitLab can interpret

So the last piece of the puzzle is the xslt template used to transform the nunit output into something GitLab can understand; you can find this

If we were to run our CI pipeline now it would fail because none of the prerequisites have been installed on the machine with the runner.

So let’s go ahead and download and install git (I went with most of the defaults and selected C:\Windows\notepad.exe as the default editor as we won’t really be using it anyway). I’m sure there is a more minimal install we could do, but this works.

You also need to launch a command prompt and run;

git lfs install --system

Next we need to install nuget- the windows binary can be downloaded from (and we decided to place it in C:\Windows\Microsoft.NET\Framework\v4.0.30319).

Now we need the Visual Studio 2017 build tools (currently available at or although I know Microsoft have a nasty habit of breaking old links).

You should be able to run the installation and select the “workloads” (or components) relevant to you; we use .NET desktop build tools, Web development build tools and Data storage and processing build tools. We also need to install .NET Framework 4.7 SDK/targeting pack (from the individual components tab).

Right- let’s give it another run and see how we’re getting on;

Excellent, our build is now working AOK, we can focus on the tests. Let’s start by downloading OpenCover from (at time of writing the latest release is 4.7.922). I chose the .zip archive and simply extracted it to C:\GitLab-Runner\opencover

And now we install NUnit Console from (at time of writing the latest release is 3.10.0). I chose the .msi and installed using the defaults.

And now if we try and run our pipeline again;

Bingo! We can see the build and test stages both passed and our test shows a result for code coverage! Now let’s check what happens if we deliberately break a test;

Perfect! This time we can see the pipeline has failed and if we raise a merge request the summary summary indicated 1 test failed out of 33 total and highlights the failed test.

The final little nicety we added a few badges to our projects (I did this this via the groups so they appear for all projects within the group rather than adding them to each project).

Go to Groups -> Settings -> General -> Badges then add;{project_path}/badges/
%{default_branch}/pipeline.svg and{project_path}/badges/ %{default_branch}/coverage.svg (you can link them to wherever you like). I am curious to find out a little more about badges, I would quite like to show the master, test and development branch pipeline and test coverage badges all on the project but I’ve yet to figure out if you can pass a parameter to change the badge label.

I suspect the next steps will be to;

  • Add some form of code style/best practice analysis
  • Start thinking about deployment (this could be tricky as it involves a lot of differents ifs, buts and maybes along with VPNS, domain users etc)

Any questions, please shout- me or my team would be happy to help you get up and running!

GitLab Setup : Summary

We have now been using GitLab CE (self hosted) for about 16 months and have made some good progress. I hope to post a short series of blog entries describing how we got GitLab setup to work for us in a predominantly Microsoft .NET development environment.

In this initial post I hope to summarise what we have acheived which I can then detail “how-to” in subsequent posts. I will probably spin up a new test instance to run through and ensure the steps are accurate (a lot of them were trial and error the first time round).

I may not go into detail on these ones as they are completely bespoke solutions- but if you are interested post a comment and I will try and do a write up;

  • Merge request approvals
  • Project “templates”
  • Global search across all projects and branches
  • Webhooks/integration with our helpdesk

Watch this space!

%d bloggers like this: